Rombi® Push SP
Mineral fertiliser NPK (Mg-S) 19-6-6 (2-37,4) with micronutrients.
Rombi® Push SP is a solid crystalline fertiliser specifically formulated for root application Due to its formulation Rombi® Push SP provides:
• Nutrient ratio high in nitrogen with micronutrients, magnesium and sulphur, especially indicated for periods of growth and vegetative development.
• Formulation with excellent solubility.
• Formulation free of chlorides and harmful salts
Total nitrogen (N): 19,0 % w/w
Ammoniacal nitrogen (N): 15,0 % w/w
Nitric nitrogen (N): 4.0 % w/w
Phosphorus pentoxide (P2O5)*: 6,0 % w/w
Phosphorus pentoxide (P2O5) soluble in neutral ammonium citrate and water: 6,0 % w/w
Potassium oxide (K2O)*: 6,0 % w/w
Magnesium oxide (MgO)*: 2,0 % w/w
Sulphur trioxide (SO3)*: 37,4 % w/w
Boron (B)*: 0,01 % w/w
Copper (Cu)**: 0.003 % w/w
Iron (Fe)**: 0,075 % w/w
Manganese (Mn)**: 0,037 % w/w
Molybdenum (Mo)*: 0.002% w/w
Zinc (Zn)**: 0,006 % w/w
*Soluble in water.
**Water-soluble chelated by EDTA
ADDITIONAL INFORMATION
pH range in which the stability of the chelated fraction is guaranteed: 3,5 – 6,5
Poor in chloride
Aspect: Soluble powder
Colour: White
pH (150 g/L): 4,8
Rombi® Push SP is specially designed to be used in mechanised irrigation (localised, sprinkling), through its previous dissolution in water and can be applied in any woody and/or horticultural crop.
To apply Rombi® Push SP it is recommended:
• Shake during preparation
• Maximum stock solution concentration: 150kg/1.000L
• Recommended irrigation concentration: 0.2-2g/L
The application rate of Rombi® Push SP will vary depending on the condition of the field and the crop. Considering the yield potential of the crop and/or the soil analysis, the dosage can be best adjusted to each situation. In general terms, the application rate will vary from 200 to 500kg/ha
Rombi ® Push SP due to its formulation is incompatible with other fertilisers containing calcium in its composition, however, in case of doubt, it is recommended to carry out a previous compatibility test and always follow the basic recommendations for field application.
The recommendations and information we provide are the result of extensive and rigorous studies and tests. However, numerous factors beyond our control (preparation of mixtures, application, climatology, etc.) may intervene in the use of the product. PLYMAG, S.L. guarantees the composition, formulation and content. The user will be responsible for any damage caused (lack of efficacy, general toxicity, residues, etc.) by total or partial non-observance of the instructions on the label.
VEGETABLES
With the aim of offering the farmer different alternatives to increase the yield of his crops, PLYMAG has a wide range of products, among which the certified products for organic farming stand out.
Legal Notice
Follow us on Social Media
® PLYMAG 2023
